Double-sided Tape
The double-sided tape record allows the user to add all Double-sided Tape used in the Product Engineering. The plate needs to be recorded only for the Engineering to calculate its consumption and cost. For more information, refer to "Double-sided Tape Consumption and Cost Calculation in the Engineering.”
The user is required to have enabled the following access options to be able to delete Double-sided Tape:
EPS > SALES > RECORDS > IQUOTE > ENGINEERING > RAW MATERIAL > DOUBLE-SIDED TAPE
Information on the Double-sided Tape Record Window
Go to Sales > Records > iQuote > Engineering > Raw Material > Double-sided Tape
Tip: For more information on the buttons in this toolbar refer to “Standard toolbar” in Basic Navigation.
Tip: For more information on adding or editing search features refer to "Searching” in Basic Navigation.
Tip: For more information on how to add other information in columns, refer to "Views" in Basic Navigation.
Add Double-sided Tape
Tip: To be able to add double-sided tapes, the user must previously record a double-sided tape Specification Characteristic Class. For more information, refer to “Double-sided Tape.”
In the system’s main menu, click Sales > Records > iQuote > Engineering > Raw Material > Double-sided Tape or enter "Double-sided Tape" in the Quick Search field.
Click Add. The following screen will open:
Complete the fields as described below:
|
Field |
Description |
|
Raw Material |
Name of the double-sided tape substrate used in the Product Engineering. |
|
Cost Account |
Name of the cost account to which the double-sided tape cost shall be allocated for future cost analysis. For more information, refer to "Add Cost Accounts." |
|
Cost sub account |
Name of the cost sub account to which the double-sided tape cost shall be assigned. The Cost Sub Account belongs to the Cost Account. For more information, refer to "Add Cost Accounts.” If the appropriate cost sub account is not listed, make sure the selected cost account is correct. |
|
Production Unit |
Unit of measurement to be sent as default for the modules of production for requesting materials. This field does not affect the Engineering calculation unit, which is the same as the generic Engineering component type unit. For more information, refer to "Add Engineering Component Types.” |
|
External Reference |
Name used for integrating the double-sided tape record with other systems. |
|
Active |
Indicates if the double-sided tape will be available for use in the Engineering. |
|
Plant |
Plant which indicates a material can only be used for Production Groups in the same plant, once it is linked to this material. Once the plant is selected and the raw material saved, it will no longer be allowed to unlink the plant linked to it, therefore, it is recommended to set this configuration with caution. This field only appears if the “Separate raw materials by plant” is enabled in Sales > Records > iQuote > Commercial > Estimate General Setup |
|
Tape Width |
Double-sided tape width. This field is informational only and will not be considered in the Engineering calculations. |
|
Tape Roll Lenght |
Double-sided tape length. This field is informational only and will not be considered in the Engineering calculations. |
|
Tape Thickness |
Double-sided tape thickness. This field is informational only and will not be considered in the Engineering calculations. |
|
Roll Weight |
Double-sided tape roll weight. This field is informational only and will not be considered in the Engineering calculations. |
|
Tape Type |
Double-sided tape type that can be linked to a raw material in order to allow this raw material to be selected by the Engineering, whenever it is selected in the Product Specification. The double-sided tape type must be previously recorded. For more information, refer to "Double-sided Tape Type.” |
When finished, click Save.
Edit Double-sided Tape
In the system’s main menu, click Sales > Records > iQuote > Engineering > Raw Material > Double-sided Tape or enter "Double-sided Tape" in the Quick Search field.
Click the appropriate Double-sided Tape to select it.
Click Edit.
Edit as needed. For more information on the buttons and fields on this screen, refer to “Add Double-sided Tape.”
When finished, click Save.
Delete Double-sided Tape
In the system’s main menu, click Sales > Records > iQuote > Engineering > Raw Material > Double-sided Tape or enter "Double-sided Tape" in the Quick Search field.
Click the appropriate Double-sided Tape to select it.
Click Delete.
Click Yes to confirm the action.
Tip: If the selected item is being used, the system displays a message that it can not be deleted
Double-sided Tape Cost and Consumption Calculation in the Engineering
Record the double-sided tape in the Double-sided Tape record. For more information, refer to "Add Double-sided Tape.”
Check if the Component Class 1015 – Double-sided Tape exists in the Engineering Component Types record. For more information, refer to the "Add Engineering Component Types.”
In production groups, link the Component Class 1015 – Double-sided Tape to the 1036 – Double-sided Tape inputs. For more information, refer to "Setting functionality 1036 – Double-sided Tape.”
Enter the Double-sided Tape cost in the raw material cost record. For more information, refer to "Add Raw Material Costs.” The double-sided tape’s consumption calculation and costs are displayed in the Engineering.